feat: 全面代码更新 - ECharts 5.4.2 重构、新增量化分析模块、前端库升级
- 升级 ECharts 到 5.4.2，重构 lib/ 目录结构 - 新增 DataTables 2.x 和 FixedColumns 插件 - 新增 quant/ 宏观研究报告模块 - 重构图表页面：stock_trend、hkholdbycode 等采用 JS fetch API.doorcome.cn 模式 - 新增 CLAUDE.md 补充页面文档和新数据流说明 - 更新 inc/config.php TuShare API 配置 - 更新新闻联播分析模块 news/ 和相关研究报告 research/ - 新增 api_document/ 参考文档 - 清理 .gitignore，排除 uploads/xls/.mcp.json/ source maps 等非代码文件 - 所有 PHP 文件通过 php -l 语法检查 Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
This commit is contained in:
Claude Opus 4.7
@@ -0,0 +1,332 @@
|
||||
hailo_platform.pyhailort.control_object
|
||||
|
||||
Control operations for the Hailo hardware device.
|
||||
|
||||
exception hailo_platform.pyhailort.control_object.ControlObjectException[source]
|
||||
|
||||
Bases: Exception
|
||||
|
||||
Raised on illegal ContolObject operation.
|
||||
|
||||
exception hailo_platform.pyhailort.control_object.FirmwareUpdateException[source]
|
||||
|
||||
Bases: Exception
|
||||
|
||||
class hailo_platform.pyhailort.control_object.HailoControl(device: hailo_platform.pyhailort._pyhailort.Device)[source]
|
||||
|
||||
Bases: hailo_platform.pyhailort.pyhailort.Control
|
||||
|
||||
Control object that sends control operations to a Hailo hardware device.
|
||||
|
||||
class hailo_platform.pyhailort.control_object.HcpControl(device: hailo_platform.pyhailort._pyhailort.Device)[source]
|
||||
|
||||
Bases: hailo_platform.pyhailort.control_object.HailoControl
|
||||
|
||||
Control object that uses the HCP protocol for controlling the device.
|
||||
|
||||
class hailo_platform.pyhailort.control_object.UdpHcpControl(remote_ip, device=None, remote_control_port=22401, retries=2, response_timeout_seconds=10.0, ignore_socket_errors=False)[source]
|
||||
|
||||
Bases: hailo_platform.pyhailort.control_object.HcpControl
|
||||
|
||||
Control object that uses a HCP over UDP controller interface.
|
||||
|
||||
__init__(remote_ip, device=None, remote_control_port=22401, retries=2, response_timeout_seconds=10.0, ignore_socket_errors=False)[source]
|
||||
|
||||
Initializes a new UdpControllerControl object.
|
||||
|
||||
Parameters
|
||||
|
||||
remote_ip (str) – The IPv4 address of the remote Hailo device (X.X.X.X).
|
||||
|
||||
remote_control_port (int, optional) – The port that the remote Hailo device listens on.
|
||||
|
||||
response_timeout_seconds (float, optional) – Number of seconds to wait until a response is received.
|
||||
|
||||
ignore_socket_errors (bool, optional) – Ignore socket error (might be usefull for debugging).
|
||||
|
||||
class hailo_platform.pyhailort.control_object.PcieHcpControl(device=None, device_info=None)[source]
|
||||
|
||||
Bases: hailo_platform.pyhailort.control_object.HcpControl
|
||||
|
||||
Control object that uses a HCP over PCIe controller interface.
|
||||
|
||||
__init__(device=None, device_info=None)[source]
|
||||
|
||||
Initializes a new HailoPcieController object.
|
||||
|
||||
hailo_platform.pyhailort.hailo_controller.i2c_slaves
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.NO_I2C_SWITCH = 5
|
||||
|
||||
Variable which defines that the I2C slave is not behind a switch.
|
||||
|
||||
exception hailo_platform.pyhailort.i2c_slaves.I2CSlavesException[source]
|
||||
|
||||
Bases: Exception
|
||||
|
||||
class hailo_platform.pyhailort.i2c_slaves.I2CSlave(name, bus_index, slave_address, switch_number=5, register_address_size=1, endianness=<Endianness.LITTLE_ENDIAN: 1>, should_hold_bus=False)[source]
|
||||
|
||||
Bases: object
|
||||
|
||||
__init__(name, bus_index, slave_address, switch_number=5, register_address_size=1, endianness=<Endianness.LITTLE_ENDIAN: 1>, should_hold_bus=False)[source]
|
||||
|
||||
Initialize a class which describes an I2C slave.
|
||||
|
||||
Parameters
|
||||
|
||||
name (str) – The name of the I2C slave.
|
||||
|
||||
bus_index (int) – The bus number the I2C slave is connected to.
|
||||
|
||||
slave_address (int) – The address of the I2C slave.
|
||||
|
||||
switch_number (int) – The number of the switch the i2c salve is connected to.
|
||||
|
||||
register_address_size (int) – Slave register address length (in bytes).
|
||||
|
||||
endianness (Endianness) – The endianness of the slave.
|
||||
|
||||
should_hold_bus (bool) – Should hold the bus during the read.
|
||||
|
||||
property name
|
||||
|
||||
Get the name of the I2C slave.
|
||||
|
||||
Returns
|
||||
|
||||
Name of the I2C slave.
|
||||
Return type
|
||||
|
||||
str
|
||||
|
||||
property bus_index
|
||||
|
||||
Get bus index the I2C slave is connected to.
|
||||
|
||||
Returns
|
||||
|
||||
Index of the bus the I2C slave is connected to.
|
||||
Return type
|
||||
|
||||
int
|
||||
|
||||
property slave_address
|
||||
|
||||
Get the address of the salve.
|
||||
|
||||
Returns
|
||||
|
||||
The address of the I2C slave.
|
||||
Return type
|
||||
|
||||
int
|
||||
|
||||
property register_address_size
|
||||
|
||||
Get the slave register address length (in bytes). This number represents how many bytes are in the register address the slave can access.
|
||||
|
||||
Returns
|
||||
|
||||
Slave register address length.
|
||||
Return type
|
||||
|
||||
int
|
||||
|
||||
Note
|
||||
|
||||
Pay attention to the slave endianness (Endianness).
|
||||
|
||||
property switch_number
|
||||
|
||||
Get the switch number the slave is connected to.
|
||||
|
||||
Returns
|
||||
|
||||
The number of the switch the I2C is behind.
|
||||
Return type
|
||||
|
||||
int
|
||||
|
||||
Note
|
||||
|
||||
If NO_I2C_SWITCH is returned, it means the slave is not behind a switch.
|
||||
|
||||
property endianness
|
||||
|
||||
Get the slave endianness.
|
||||
|
||||
Returns
|
||||
|
||||
The slave endianness.
|
||||
Return type
|
||||
|
||||
Endianness
|
||||
|
||||
property should_hold_bus
|
||||
|
||||
Returns a Boolean indicating if the bus will be held while reading from the slave.
|
||||
|
||||
Returns
|
||||
|
||||
True if the bus would be held, otherwise False.
|
||||
Return type
|
||||
|
||||
bool
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_MIPI_AVDD
|
||||
|
||||
Class which represents the MIPI AVDD I2C slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_USB_AVDD_IO
|
||||
|
||||
Class which represents the USB AVDD IO slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_VDD_CORE
|
||||
|
||||
Class which represents the V_CORE slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_VDD_TOP
|
||||
|
||||
Class which represents the VDD TOP slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_MIPI_AVDD_H
|
||||
|
||||
Class which represents the MIPI AVDD_H I2C slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_USB_AVDD_IO_HV
|
||||
|
||||
Class which represents the DVM USB AVDD IO HV slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_VDD_IO
|
||||
|
||||
Class which represents the DVM_VDDIO slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_AVDD_H
|
||||
|
||||
Class which represents the DVM_AVDD_H slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_SDIO_VDD_IO
|
||||
|
||||
Class which represents the DVM_SDIO_VDDIO slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_M_DOT_2_OVERCURREN_PROTECTION
|
||||
|
||||
Class which represents the DVM_SDIO_VDDIO slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_I2S_CODEC
|
||||
|
||||
Class which represents the I2S codec I2C slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_I2C_TO_GPIO
|
||||
|
||||
Class which represents the I2C to gpio I2C slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_SWITCH
|
||||
|
||||
Class which represents the I2C switch slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_TEMP_SENSOR_0
|
||||
|
||||
Class which represents the I2C TEMP_sensor_0 slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_TEMP_SENSOR_1
|
||||
|
||||
Class which represents the I2S TEMP_sensor_1 slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_EEPROM
|
||||
|
||||
Class which represents the EEPROM I2C slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.I2C_SLAVE_RASPICAM
|
||||
|
||||
Class which represents the raspicam I2C slave.
|
||||
|
||||
hailo_platform.pyhailort.i2c_slaves.set_i2c_switch(control_object, slave, slave_switch=None)[source]
|
||||
|
||||
Set the I2C switch in order to perform actions from the I2C slave.
|
||||
|
||||
Parameters
|
||||
|
||||
control_object (HcpControl) – Control object which communicates with the Hailo chip.
|
||||
|
||||
slave (I2CSlave) – Slave which the switch is set for.
|
||||
|
||||
slave_switch (I2CSlave) – The I2C slave for the switch it self. Defaults to I2C_SLAVE_SWITCH.
|
||||
|
||||
hailo_platform.tools.udp_rate_limiter
|
||||
|
||||
Tool for limiting the packet sending rate via UDP. Needed to ensure the board will not get more traffic than it can handle, which would cause packet loss.
|
||||
|
||||
exception hailo_platform.tools.udp_rate_limiter.RateLimiterException[source]
|
||||
|
||||
Bases: Exception
|
||||
|
||||
A problem has occurred during the rate setting.
|
||||
|
||||
exception hailo_platform.tools.udp_rate_limiter.BadTCParamError[source]
|
||||
|
||||
Bases: Exception
|
||||
|
||||
One of shell’s tc command params is wrong.
|
||||
|
||||
exception hailo_platform.tools.udp_rate_limiter.BadTCCallError[source]
|
||||
|
||||
Bases: Exception
|
||||
|
||||
Shell’s tc command has failed.
|
||||
|
||||
class hailo_platform.tools.udp_rate_limiter.RateLimiterWrapper(configured_network_group, fps=1, fps_factor=1.0, remote_ip=None)[source]
|
||||
|
||||
Bases: object
|
||||
|
||||
UDPRateLimiter wrapper enabling with statements.
|
||||
|
||||
__init__(configured_network_group, fps=1, fps_factor=1.0, remote_ip=None)[source]
|
||||
|
||||
RateLimiterWrapper constructor.
|
||||
|
||||
Parameters
|
||||
|
||||
configured_network_group (ConfiguredNetwork) – The target network_group.
|
||||
|
||||
fps (int) – Frame rate.
|
||||
|
||||
fps_factor (float) – Safety factor by which to multiply the calculated UDP rate.
|
||||
|
||||
remote_ip (str) – Device IP address.
|
||||
|
||||
class hailo_platform.tools.udp_rate_limiter.UDPRateLimiter(remote_ip, port, rate_kbits_per_sec=0)[source]
|
||||
|
||||
Bases: object
|
||||
|
||||
Enables limiting or removing limits on UDP communication rate to a board.
|
||||
|
||||
__init__(remote_ip, port, rate_kbits_per_sec=0)[source]
|
||||
|
||||
set_rate_limit()[source]
|
||||
|
||||
reset_rate_limit()[source]
|
||||
|
||||
static calc_udp_rate(hef, network_group_name, fps, fps_factor=1, max_supported_kbps_rate=850000.0)[source]
|
||||
|
||||
Calculates the proper UDP rate according to an HEF.
|
||||
|
||||
Parameters
|
||||
|
||||
hef (str) – Path to an HEF file containing the network_group.
|
||||
|
||||
network_group_name (str) – Name of the network_group to configure rates for.
|
||||
|
||||
fps (int) – Frame rate.
|
||||
|
||||
fps_factor (float, optional) – Safety factor by which to multiply the calculated UDP rate.
|
||||
|
||||
max_supported_kbps_rate (int, optional) – Max supported Kbits per second. Defaults to 850 Mbit/s (850,000 Kbit/s).
|
||||
|
||||
Returns
|
||||
|
||||
Maps between each input default dport to its calculated Rate in Kbits/sec.
|
||||
Return type
|
||||
|
||||
dict
|
||||
|
||||
Reference in New Issue
Block a user